Corner measurement Definitions (sample)

Front Rake Angle: The included (inside) angle between horizontal (the deck) and the toughened glass corner's centre (inside) vertical trim. This angle is taken parrallel to the centre line of the boat (38 1/2 deg)

Wing Setback Angle: The included (inside) angle between horizontal (the deck) and the toughened glass corner's Rear (outboard) vertical trim. This angle is taken parallel to the centre line of the boat (40 deg)

Wing Tumble Angle: The included (inside) angle between Vertical and the toughened glass corner's Rear (outboard) vertical trim. This angle is taken perpendicular to the centre line of the boat (18 deg)

Front Vertical Height: The vertical height of the toughened glass corner's centre (inboard) vertical trim from the deck (15 1/2")

Front Slant Height: The true length of the toughened glass corner's centre (inboard) vertical trim (25 9/16")

Wing Vertical Height: The Vertical height of the toughened glass corner's rear (outboard) vertical trim from the deck. (11 5/16")

Wing Slant Height: The true length of the toughened glass corner's rear (outboard) vertical trim. (18 1/4")

Bottom Chord: The width of one toughened glass corner with trim, from the widest edge at the bottom on the rear (outboard) vertical trim to the bottom inside edge of the centre (inboard) vertical trim taken perpendicular to the centre line of the boat (28")

Top Chord: The width of one toughened glass corner with trim, from the widest edge at the top on the rear (outboard) vertical trim to the top inside edge of the centre (inboard) vertical trim taken perpendicular to the centre line of the boat (26 3/8")

Vee Depth: The length of one toughened glass corner with trim, from the front bottom edge of the centre (inboard) vertical to the widest edge at the bottom on the rear (outboard) vertical trim taken parallel to the centre line of the boat (19 3/4")

Part definitions

Glass Front: The toughened Glass corner section of the windscreen set

Port: The left hand side of the boat as looking forward from the helm

Starboard: The Right hand side of the boat as looking forward from the helm

Top trim, header bar: The aluminium extrusion on the top of the glass

Bottom trim, sill bar: The aluminium extrusion on the bottom of the glass

Inboard vertical: The aluminium extrusion closest to the centre line of the boat

Out board vertical: The aluminium extrusion closest to the outside of the boat

Wings: The 3 or 4 sided panels that join onto the rear of the corners

Fixed Centre: A fixed panel between the corners to make the windscreen wider

Door: An opening out panel (normally opening to Port) between the corners to make the windscreen wider

Set

4 piece set: One pair of toughened glass corners and one pair of toughened glass wings. Corners slide together and the wings slide onto the back of the corners

5 piece fixed set: One pair of toughened glass corners, one pair of toughened glass Wings and a Fixed Centre. A fixed centre panel slides between the two corners and the wings slide onto the back of the corners

5 piece Door set: One pair of toughened glass corners, one pair of toughened glass Wings and a centre Door. A Door panel hinged off the Port Corner between the two corners and the wings slide onto the back of the corners

The Toughened glass corners are set shapes and cannot be changed. Wing, Fixed Centre or Door sizes are free.